|
What online training programs do we offer? We currently
offer online training classes for our most popular products. Listed below
are our current classes we offer online. Click on the course for a brief
description of the class outline. All class times are approximately 1
hour.
|
 |
|
|
|
|
6272
 In this class you will learn about the 6272 Color Graphic Voice
Touchscreen Keypad family. You will become familiar with many aspects of
6272 installation. Know the details of the 6272 wiring, setup, and
enabling the alarm panel. And finally you will learn how to setup the
custom home page and slide show.
|
 Back to
Top |
GSM Communication
 In this class you will learn how to complete new and replacement
installations with the AlarmNet GSM radio. Upon completion you will have a
good understanding of the GSM network, proper wiring, correct placement,
control and radio programming, registration of the radio, and
troubleshooting.
|
| Back to
Top |
Compass Software - Version 2.0
 We will go over system requirements.
Basic software installation will be shown. Account Setup and Panel
Communication including Uploading, Downloading and Event log will be
covered. Account and Database management will also be explained.
|
| Back to
Top |
Honeywell Alarm Basics
 This class will provide an understanding of basic burglar and
fire alarm systems, components of the systems, output and input devices
and how they communicate. This class will help security related employees
understand basic alarm and fire systems. There are no prerequisites for
attending this class.
|
| Back to
Top |
Lynx Series
 This class will cover the Lynx Series Basic and Advanced
programming features. You will also be presented with programming
scenarios, which apply in real world installations. The class is designed
for individuals that may be new to the Lynx Series and/or the alarm
industry. Basic knowledge of wiring and the alarm industry is all you will
need to benefit from the Lynx Series web class. Upon completion, you will
be able to perform typical Lynx installations.
|
| Back to
Top |
Lynx Touch
 This class will cover the Lynx Touch Basic features. The class will show you how to move through the new touch screen programming and is designed for individuals that have taken the Lynx Series course or have some experience with Lynx Series controls.
|
| Back to
Top |
Total Connect 1.0
 This class will cover Total Connect 1.0 Services Used with older revision panels and radios. The class will cover and help you understand the installation and setup of Total Connect 1.0 Services from start to finish and includes the basic setup.
|
| Back to
Top |
Total Connect 2.0
 Don’t be left behind! This class will introduce you to our Remote Service Total Connect 2.0 and provide you with a live demonstration of the award winning service. Don’t worry! We will cover setup from start to finish so you will see how simple it is to bring the many benefits of this service to your customers.
|
| Back to
Top |
IP Video for Total Connect
 This class will go into detail on setup and use of IP Video for
Total Connect which will allow you to easily setup and view video. Live
look-in from a PC or web-enabled PDA or cell phone will allow you to keep
check on your home, office or family member while you are away.
|
| Back to
Top |
|
 This course will cover Honeywell’s Audio Verification System. The
AVS two-way voice technology provides instant communication between
end-users and control station operators during an emergency. We will also
show you how the AVS connects easily to Honeywell VISTA systems and can be
mounted directly inside the VISTA cabinet.
|
| Back to
Top |
VISTA-10P
This panels programming features are
covered by the VISTA P Series course. We will show a comparison chart to
explain the differences between the 10P, 15P and 20P control panels. The
course will cover programming locations, Output programming, and security
code protocols. Upon completion of this course, you will be able to
complete a typical VISTA-10P, 15P and 20P installation with little or no
assistance.
|
| Back to
Top |
VISTA-15P This panels programming features are covered
by the VISTA P Series course. We will show a comparison chart to explain
the differences between the 10P, 15P and 20P control panels. The course
will cover programming locations, Output programming, and security code
protocols. Upon completion of this course, you will be able to complete a
typical VISTA-10P, 15P and 20P installation with little or no assistance.
|
| Back to
Top |
VISTA P Series
The course covers most versions of the VISTA P Series controls. We will cover programming locations, Output
programming, and security code protocols. We will also show a comparison
chart to explain the differences between the 10P, 15P and 20P control
panels. Upon completion of this course, you will be able to complete a
typical VISTA P Series installation with little or no assistance.
|
| Back to
Top |
VISTA-21iP/VISTA-21iPSIA
This class is intended for those who have taken the VISTA P
Series course and are familiar with its programming. The VISTA-21iP is an
enhanced version of the VISTA-20P. This class will cover many of the
unique features of the VISTA-21iP/SIA. Programming locations will be
discussed in detail. Many of the common VISTA panel features will NOT be
covered. Upon completion of this course, you will be able to complete a
typical VISTA-21iP install with little or no assistance.
|
| Back to
Top |
V-Plex® This class will cover the basics of the V-Plex®
polling loop that our commercial panel's use for zone communication. It is
intended for those who are interested in moving into the larger panel
family but are unsure of the benefits of using a single data cable for
zone communication. After completing this course you will have a better
understanding of V-Plex® wiring and typical installations.
|
| Back to
Top |
