|
|
FG1625RFM |
|
|
|
|
|
|
|
The FG1625RFM Glassbreak Detector uses field proven FlexGuard® technology to
provide faster response and increased false alarm immunity. The FG1625RFM is
specifically designed to allow a fast, easy installation, while the adjustable
sensitivity settings can compensate for the acoustics of any room. Optimum
operation can be quickly verified using the FG701 Glassbreak Simulator.
Features
- FlexCore™ Signal Processor
The FlexCore Signal
Processor is an Application-Specific Integrated Circuit (ASIC), which
processes sound data in parallel rather than sequentially for faster, more
accurate detection decisions. The combination of proven FlexGuard® performance
with the speed of FlexCore processing provides unmatched false alarm immunity
without compromising detection.
- Easy Installation and Setup
Honeywell’s patented
technology allows remote activation of Test Mode (with simulator). The
FG1625RFM recesses in a 1.0" (26mm) diameter hole through a false ceiling or
sheetrock. A hand-clap feature verifies that the detector is functioning.
- Selectable Sensitivity
Two DIP switches on the
FG1625RFM make it easy to set the sensitivity to match the acoustics of the
room. Four different sensitivity levels are available, ranging from very low
to high. The range can then be verified remotely with the FlexGuard FG701
Glassbreak Simulator.
- Mount the Detector Anywhere
Flush mounts in any wall,
or in the ceiling, with no minimum range and a maximum range of 25' (7.6 m) to
the glass.
- Covers All Glass Types
The FG1625RFM works on all
glass types, including plate, tempered, laminated, wired, filmcoated, and
sealed insulating glass.
- Multiple Domain Signal Analysis
The FG1625RFM
performs Multiple Domain Signal Analysis in which time, frequency and
amplitude characteristics are evaluated for signal qualification. This enables
the detector to accurately discriminate false alarms from true glassbreak
events.
- Patented Remote Test Mode
The Patented Remote Test
Mode can enable or disable the indicator LEDs using the FG701 Glassbreak
Simulator. The unit automatically resets from Test Mode in five minutes.
- Mounting Locations
The FG1625RFM can be flush mounted
in the ceiling, opposite wall, adjoining wall, or the same wall as the glass
through a 1" diameter hole. |
|
|
|
|
|
|
|
